TUBE OD: 15 mm
THREAD: 1/2" BSPP

EASY TO USE PUSH-FIT SYSTEM FOR COMPRESSED AIR
The John Guest range of push-in fittings and pipe provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, compared with other installation methods, time savings of at least 50% are easily achievable.

No need to prepare threaded pipe or solvent, all the connections can be made with a simple push-in action. The system is then immediately ready for use. Complex systems can be assembled much more rapidly than with traditional methods and because fittings are easy to disconnect, systems can be altered or extended with much reduced production down time. The fittings are produced in either a tough engineering plastics material or in brass in sizes 12mm to 28mm. They are intended for use with John Guest nylon pipe but can also be used with copper or aluminium pipe.

FOOD QUALITY
All fittings in the John Guest Section with this symbol are produced in Food and Drug Administration (FDA) approved materials and are therefore recommended for food quality applications.

FEATURES / BENEFITS
• Installation time reduced by at least 50%
• Lightweight, easy to handle
• Safe, secure, leakproof
• Easy to alter or extend a system
• No corrosion, reduced maintenance

TUBE TYPES
John Guest fittings are suitable for use with a wide range of plastic and soft metal tubing including UPVC, ABS, Polyethylene, Nylon, Mild steel and Copper to the tolerances set out below. Soft plastic tube, such as nylon, is to have a minimum wall thickness of 1.5 mm. The tube is also to have good quality surface and be damage free.

The John Guest compressed air system is suitable for the following temperatures/pressures.
For other fluids and pressures please consult distributor.